Return to site

Important Timber Supplies Storage Related Tips To Follow

· Hardwood Decking,Decking Sydney,Timber Supplies,Decking Suppliers,Timber Decking

Getting timber supplies is an expensive decision and if there are possibilities that you might have to store them for some days before usage, things will get complex for sure. Yes, experts say that in the absence of proper handling, maintenance, storage, etc., these supplies will not be able to withstand the harshness of nature for too long. Here in this post, we have come up with some important points to take note of as far as storage of these supplies is concerned.

Timber Panaling

Keep Timber Indoors If Possible

  • The very first tip that every seller of hardwood decking solutions would give is to store these products indoor, if possible.
  • Actually, the fact is that even if it’s not possible, you need to make arrangements so that one way or the other, they are stored in the indoors only.
  • Remember that in the absence of adequate protection, these timber supplies will take no time at all in warping, shrinking, bending and getting discolored.
  • Because of these vulnerabilities, they will become susceptible to pest attack and here, the point is that leaving them under open skies will degrade their quality in every term.
  • Storing them in well-ventilated indoor areas is the best way to protect them from damage caused by these factors.
timber decking

Place Them On Flat Surfaces

  • One more recommendation that vendors of hardwood decking Sydney would make is that after acquiring them, you need to park them on a flatter surface.
  • It is recommended further that they should never be parked horizontally as this will allow timber supplies to maintain their surface during the parking period.
  • Other than this, if stacking timber pieces of varying sizes, place the largest piece at the bottom.
Timber Decking Sydney

Minimise Floor Contact

  • There is another very important point that while storing them, you need to ensure that floor contact is minimised, as this will prevent them from numerous dangers and risks.
  • The first risk is of moisture that is often present invisibly in the floor and walls of a building, followed by the fact that this will also minimize risks associated with pest infestation.

Learn More